General Features
| Clamp force | kN | 500 |
| Air pressure to machine | bar | 8 |
| Air consumption (estimated) | Nlt / min | 4500 |
| Cooling capacity = Hydraulic system + head |
Kcal/h / Kg/hr | 25000 |
| Cooling capacity = Mould | Kcal/h / Kg/hr |
45000 |
| Minimum pressure for cooling water to machine | bar | 4 |
| Total power installed | Kw | 193 |
Extruders
| Type | 90/24 D | 100/24 D | |
| Screw diameter | mm | 90 | 100 |
| Power of electric motor | Kw | 65 | 90 |
| Max throughput = PE | kg/h | 200 | 260 |
| Heating power | Kw | 18,5 | 32,4 |
Accumulator Head
| Head Size | kg | 8 |
10 | 12 |
| Max accumulator volume | lt | 10,8 | 13,7 | 16,5 |
| Min die diameter | mm | 30 | 50 | 50 |
| Max die diameter | mm | 300 | 400 | 400 |
| Heating power | Kw | 22 | 31,8 | 37,4 |
| Number of heating zones | n. | 8 | 8 |
8 |
Clamp Details
| Maximum Daylight | A | mm | 1400 |
| Minimum Daylight | B | mm | 500 |
| Dimensions between tie bars | CxD | mm | 800x1200 |
| Maximum closing speed | mm/sec | 500 | |
| Open stroke | EX2 | mm | 450x2 |
 |
|||
Machine Dimensions
| Maximum width | mm | 3570 |
| Maximum length | mm | 6800 |
| Maximum height | mm | 5250 |
| Total weight | kg | 38000 |
